Description

Cherrylock H681 Pulling Heads

Nominal head length is 2-9/16″. Fits directly on all Cherry hydroshift riveters. Separate pulling head is required for each diameter rivet.

The H681 pulling heads are used to install 2000 series Cherrylock rivets. A separate pulling head is required for each diameter of rivet. Fits the following riveters: GBP models GBP700 and GBP784, Cherry models G700 and G784.

A separate H681 series pulling head is required for each diameter CherryLock Rivet. Although universal (U) pulling heads are available, it is acceptable that countersunk (C) pulling heads be used for installing both universal and countersunk head CherryLock Rivets.
These heads fit directly on all Cherry Hydro-shift Riveters.

H681 pulling heads may be obtained in four extended lengths to reach into difficult access areas. These are 2”, 6”, 12” & 24” extensions added to the normal head length of 2-9/16″.

H681-8C-E2 for 2″ Extended Pulling Head

H681-8C-E6 for 6″ Extended Pulling Head

H681-8C-E12 for 12″ Extended Pulling Head

H681-8C-E24 for 24″ Extended Pulling Head